View OM1322STM_1291881.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

OM1322SMM OM1322NMM OM1322NKM OM1322NTM
OM1322STM OM1322N2M
1.5 AMP NEGATIVE ADJUSTABLE VOLTAGE REGULATOR APPROVED TO DESC DRAWING 7703403
Three Terminal, Precision Adjustable Negative Voltage Regulator In Hermetic Style Packages (LM137)
Please see mechanical outlines herein
FEATURES
* * * * * Similar To Industry Standard LM137 Approved To DESC Standardized Military Drawing Number 7703403 Built In Thermal Overload Protection Short Circuit Current Limiting Available In Six Package Styles
DESCRIPTION
These three terminal negative regulators are supplied in hermetically sealed packages. All protective features are designed into the circuit, including thermal shutdown, current-limiting, and safe-area control. With heat sinking, these devices can deliver up to 1.5 amps of output current. The LCC-20 device is limited to .5 amps. The unit also features output voltages that can be fixed from -1.2 volts to -37 volts using external resistors.
ABSOLUTE MAXIMUM RATINGS Tc @ 25C
Power Dissipation Case 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1 W Case-All Others. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 W Input - Output Voltage Differential . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 V Operating Junction Temperature Range . . . . . . . . . . . . . . . . . . . . . - 55C to + 150C Storage Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 65C to + 150C Lead Temperature (Soldering 10 seconds) . . . . . . . . . . . . . . . . . . . . . . . . . . . 300C Thermal Resistance, Junction to Case: Case 2, LCC-20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17C/W Case U & M, TO-257 (Isol) and SMD-3 . . . . . . . . . . . . . . . . . . . . . . . . . . 4.2C/W Case T&N, TO-257 (Non-Isol) and SMD-1 . . . . . . . . . . . . . . . . . . . . . . . 3.5C/W Case Y, TO-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.0C/W Maximum Output Current: Case 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 A Case-All Others. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5A Recommended Operating Conditions: Output Voltage Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .-1.2 to -37 VDC Ambient Operating Temperature Range (TA) . . . . . . . . . . . . . . . - 55C to + 125C Input Voltage Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -4.25 to -41.25 VDC
4 11 R2 Supersedes 1 07 R1
3.5
3.5 - 9
OM1322NTM, OM1322STM, OM1322NKM, OM1322SMM, OM1322NMM, OM1322N2M
ELECTRICAL CHARACTERISTICS
Parameter Reference Voltage Symbol VREF
-55C TA 125C, IL = 8mA (unless otherwise specified)
OM1322NTM, OM1322STM, OM1322NKM, OM1322SMM, OM1322NMM
Test Conditions VDIFF = 3.0V, TA = 25C VDIFF = 3.0V VDIFF = 40V, TA = 25C VDIFF = 40V Line Regulation (Note 1) Load Regulation (Note 1) RLOAD RLINE 3.0 V VDIFF 40V, TA = 25C 3.0 V VDIFF 40V VDIFF = 5.0V, 8mA IL 1.5A VDIFF = 12V, 8mA IL 1.5A, TA = 25C VDIFF = 40V, 8mA IL 200mA, TA = 25C VDIFF = 40V, 8mA IL 100mA Thermal Regulation VRTH Vin = -14.6V, IL = 1.5A Pd = 20 Watts, t = 10 ms, TA = 25C Ripple Rejection (Note 2) Adjustment Pin Current IAdj RN f = 120 Hz, Vout = Vref CAdj = 10 F VDIFF = 3.0V VDIFF = 40V Adjustment Pin Current Change Miminum Load Current IAdj (Line) IAdj (Load) ILmin 3.0V VDIFF 40V VDIFF = 5V, 8mA IL 1.5A VDIFF = 3.0V, Vout = -1.4V (forced) VDIFF = 10V, Vout = -1.4V (forced) VDIFF = 40V, Vout = -1.4V (forced) Current Limit (Note 2) ICL VDIFF 5V VDIFF = 40V, TA = 25C Min. -1.275 Max. -1.225 -1.20 -1.225 -1.20 9 23 25 25 25 25 5 mV mV mV V Unit
* * * *
-1.30 -1.275 -1.30 -9 -23 -25 -25 -25
*
-25 -5
* * * * * * * * *
66
dB
100 100 -5 -5 5 5 3.0 3.0 5.0 1.5 0.24 3.5 1.2 A mA A A A
Notes: 1. Load and Line Regulation are specified at a constant junction temperature. Pulse testing with low duty cycle is used. Changes in output voltage due to heating effects must be taken into account separately. 2. If not tested, shall be guaranteed to the specified limits. 3. The * denotes the specifications which apply over the full operating temperature range.
PART NUMBER DESIGNATOR
Standard Military Drawing Number Omnirel Part Number OM1322SMM OM1322STM OM1322NTM OM1322 NKM OM1322NMM OM1322N2M Omnirel Package Designation SMD-3 TO-257 (Isolated) TO-257 (non-Isolated) TO-3 SMD-1 LCC-20
3.5
7703403M 7703403U 7703403T 7703403Y 7703403N 77034032
3.5 - 10
OM1322NTM, OM1322STM, OM1322NKM, OM1322SMM, OM1322NMM, OM1322N2M
ELECTRICAL CHARACTERISTICS
OM1322N2M
Parameter Reference Voltage Symbol VREF
-55C TA 125C, IL = 8mA (unless otherwise specified)
Test Conditions VDIFF = 3.0V, TA = 25C VDIFF = 3.0V VDIFF = 40V, TA = 25C VDIFF = 40V
Min. -1.275
Max. -1.225 -1.20 -1.225 -1.20 9 23 25 25 25 25 5
Unit
* * * *
-1.30 -1.275 -1.30 -9 -23 -25 -25 -25
V
Line Regulation (Note 1) Load Regulation (Note 1)
RLINE
3.0 V VDIFF 40V, TA = 25C 3.0 V VDIFF 40V VDIFF = 5.0V, 8mA IL 200mA VDIFF = 15V, 8mA IL 200mA, TA = 25C VDIFF = 40V, 8mA IL 150mA, TA = 25C VDIFF = 40V, 8mA IL 50mA
mV
RLOAD
mV
*
-25 -5
Thermal Regulation
VRTH
Vin = -16.25V, IL = 330mA Pd = 5 Watts, t = 10 ms, TA = 25C
mV
Ripple Rejection (Note 2) Adjustment Pin Current
RN
f = 120 Hz, Vout = Vref CAdj = 10 F VDIFF = 3.0V VDIFF = 40V 3.0V VDIFF 40V VDIFF = 5V, 8mA IL 500 mA VDIFF = 3.0V, Vout = -1.4V (forced) VDIFF = 10V, Vout = -1.4V (forced) VDIFF = 40V, Vout = -1.4V (forced) VDIFF 5V VDIFF = 40V, TA = 25C
* * * * * * * * *
66
dB
IAdj
100 100 -5 -5 5 5 3.0 3.0 5.0 0.5 0.15 1.8 0.65 A mA A A A
Adjustment Pin Current Change Miminum Load Current
IAdj (Line) IAdj (Load) ILmin
Current Limit (Note 2)
ICL
Notes: 1. Load and Line Regulation are specified at a constant junction temperature. Pulse testing with low duty cycle is used. Changes in output voltage due to heating effects must be taken into account separately. 2. If not tested, shall be guaranteed to the specified limits. 3. The * denotes the specifications which apply over the full operating temperature range.
IPROG + CIN* 1.0F R2 R1 120 CO** + 1.0F
* Cin is required if regulator is located more than 4 inches from power supply filter. A 1 F solid tantalum or 10 F aluminum electrolytic is recommended. ** Co is necessary for stability. A 1 F solid tantalum or 10 F aluminum electrolytic is recommended.
3.5
IAdj VIN -VIN OM1322STM VOUT -VOUT
Vout = -1.25 V (1 +R2) R1
3.5 - 11
OM1322NTM, OM1322STM, OM1322NKM, OM1322SMM, OM1322NMM, OM1322N2M
MECHANICAL OUTLINE
.425
.420 .410
.200 .190 .045 .035 .665 .645 .537 .527
1
.100 .200
3 2
.035 WIDE FLAT 3 PLCS.
.425
.150 .140
.350 MIN.
123
.430 .410
.020
.020 .115 .160
.080
.038 MAX.
OM1322SMM
.750 .500 .005
Front View Pin 1 - Adjust Pin 2 - Output Pin 3 - Input Case - Isolated
.035 .025
.100 TYP.
.120 TYP.
OM1322STM Isolated
Front View Pin 1 - Adjust Pin 2 - Input Pin 3 - Output Tab - Isolated
OM1322NTM Non-Isolated
Front View Pin 1 - Adjust Pin 2 - Input Pin 3 - Output Tab - Input
.140 .015 .075 .157
.140
.140 .075
1
2
.030 MIN.
1
.415
2 3
.062
3 .375
OM1322NMM
Pin 1 - Adjust Pin 2 - Output Pin 3 - Input
1.53 REF. 0.875 MAX. 0.135 MAX. 0.450 0.250 0.312 MIN. SEATING PLANE 0.043 0.038 2 PLCS. 0.225 0.205 0.161 0.151 0.525 R. MAX.
.003
1.197 1.177 0.675 0.655 0.440 0.420
.065 .020 X45 REF.
(.003)
.009 R. 20 PLCS. .040
4
.010
0.188 R. MAX.
.075 (.010) TYP.
9
2 1
.025 TYP. .085
3 1 19
.160 SQ. REF.
13 18 14
.025 SQ. TYP.
.050 TYP. .040 X45 REF (3 PL)
.050 (.005) TYP.
OM1322N2M
3.5
OM1322NKM
Pin 1 - Adjust Pin 2 - Output Case - Input
Pin 1 Pin 2 Pin 3 Pin 4 Pin 5 Pin 6 Pin 7 Pin 8 Pin 9 Pin 10
VOUT VOUT(Sense) NC NC NC NC NC NC NC NC
Pin 11 Pin 12 Pin 13 Pin 14 Pin 15 Pin 16 Pin 17 Pin 18 Pin 19 Pin 20
VIN NC NC NC NC ADJUST NC NC NC NC
For additional information please see the mechanical outline section.

▲Up To Search▲

Price & Availability of OM1322STM

	To Download OM1322STM Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .